Frigidaire GLHS66EJSB Side-by-Side Refrigerator

Most side-by-side refrigerators are equipped with shelves that are supported at the back of the refrigerator.

To adjust your shelves, remove all items from shelf / shelves and lift the front edge up.

Next, pull the shelf out and replace the shelf by inserting the hooks at the rear of the shelf into the wall bracket. Lower the shelf into the desired slot and lock into position. Some models have glass shelves that slide out for easy access.

The shelves slide out independently of their mounting brackets, just pull the front of the shelf forward. Shelves can be extended as far as the stopper will allow but are not removable from their mounting brackets.

Setting the humidity control on your crisper drawers is not hard but we often forget what the best setting is based on the food type. Here are some helpful tips:

Leafy vegetables keep best when stored with the humidity control set on HIGH, or in a drawer without a humidity control. This keeps incoming air to a minimum and maintains maximum moisture.
Non-leafy vegetables and fruits still in their skin should be stored with the humidity control set on LOW. It’s best to wash items and remove any excess water before placing in the crisper drawers.
Items with strong odors or high moisture content should be wrapped before storing.
If you have a refrigerator model with the Auto CrispSealTM Drawer, they are equipped with an auto humidity control on the side of each crisper under the humidity control cover. Good news – no settings needed!

In general, you should change your water filter every six months to ensure the highest possible water quality.

On most models, the Water Filter Status on your display will illuminate and prompt you when it’s time to replace the filter. If your refrigerator has not been used for a period of time (during moving for example), it is recommended to change the filter before reinstalling the refrigerator.

To order replacement filters, simply go to our Filter & Parts page. Remember to order the same filter type that is currently in your refrigerator.