Loading ...
Loading ...
Loading ...
• Makesurethetowvehicleparkingbrakeisset,mowerislevel,andbladesare
disengaged.
• Checksparkplugwire, oil, andfuel.
• Checkallelectricalconnections(SeeSchematics).
• Makesuretoggleswitchisturned"ON" andtheredtetherisproperlyattached.
• Setengineidleto"CHOKE" position.
• With feetclearof mowerdeck,turnkeyswitchtothe"START" position;[ if unit is
equippedwith 12volt system] releasewhenenginebeginstorun.
• ForunitsNOT equippedwith electricstartturnkeyto"ON" positionandpull starter
Ropeuntil enginestarts.
• SetengineidleatdesiredRPM.
BREAKING IN YOUR MOWER
• Setvehicleparkingbrakeorchockwheelstopreventaccidentalrolling.
• Startengineproperly.
• Slowly,engagebladecontrol.
• In asafeenvironment,i.e.nochildren,allowbladesto rotateandenginetoidlefor 5
minutes.Thisbreaksin thebeltsandtheengine.
• Stopmowerproperly.
I& CAUTION! 1
SHUT OFF MOWER ENGINE AND REMOVE SPARK PLUG WIRE FROM
SPARK PLUG BEFORE MAKING ANY ADJUSTMENTS TO THE MOWER.
MOWER HEIGHT ADJUSTMENT
• Adjust while mower is not running.
• The cutting range is approximately 1.5" to 4.5". The height has been measured from the
ground to the blade tip without the engine running.
• Rotate height adjust crank handles (HTN) in a clockwise direction to lift the mower deck.
A counter-clockwise direction is used to lower the mower deck.
• Make sure the height adjustment is the same at side crank handles. For best results, see
"SUGGESTED PRACTICE" section. Graduated scales are for reference only, not the
actual cutter height.
• Place crank handle in a retracted position to maintain height adjustment.
STARTING TO MOW
• Adjust the cutting height.
• Double check vehicle to mower attachment.
• Start mower engine properly.
• Slowly, activate the blade engage lever (6008) by rotating it forward and left until the
lever locks into place.
• Carefully mount tow vehicle and start mowing slowly.
Loading ...
Loading ...
Loading ...