Loading ...
Loading ...
Loading ...
4
Important Safety Information
•Topreventinjurytoyouordamagetotheunit,
the appliance should be unpacked and set up by
two people.
•Iftheapplianceisdamagedondelivery,contact
the supplier immediately before connecting it to
the power source.
•Toguaranteesafeoperation,ensurethatthe
appliance is set up and connected as described
in this manual.
•Disconnecttheappliancefromthepowersource
if a fault occurs. Pull out the plug, turn off or dis-
able the power source.
•Whendisconnectingtheappliance,alwayspullit
out by the plug; never pull on the cable.
•Anyrepairsandworkontheapplianceshould
only be performed by the customer service
department. Unauthorized work may be danger-
ous to the user. The power source cable should
only be changed or replaced by the customer
service department.
•Donotstoreexplosivesorspraysusingcom-
bustible propellants such as butane, propane,
pentane, etc. in the appliance. Electrical compo-
nents might cause leaking gas to ignite. You can
identify such sprays by the printed contents or a
flame symbol.
•Topreventpossibleinjuryduetoanelectric
shock, be sure to disconnect the power cord or
turn off the circuit breaker before cleaning the
appliance.
•Toavoidinjuryordamagetotheappliance,do
not use steam cleaning equipment to clean the
appliance.
•Donotoperatetheapplianceinthepresenceof
explosive fumes.
•Intheeventofapoweroutage,openthedoor
as infrequently as possible.
•Toprotecttheappliancefrompossibledamage,
allow it to stand 1/2 to 1 hour in place before
turning on the electricity. This allows the refriger-
ant and system lubrication to reach equilibrium.
S
AFETY
Electrical Safety
Connect this appliance to a 15 amp or 20 amp, 110-
120 VAC, circuit which is grounded and protected by a
circuit breaker or fuse.
We recommend using a dedicated circuit for this appli-
ance to prevent circuit overload and the chance of
interruption to the appliance.
This appliance is equipped with a three-prong (ground-
ing) polarized plug for your protection against possible
shock hazards.
Where a two-prong wall receptacle is encountered,
contact a qualified electrician and have it replaced with
a properly grounded three-prong receptacle in accor-
dance with all local codes and ordinances.
WARNING!
Electrocution hazard.
Electricalgroundingrequired.
•
Do not remove the round grounding
prong from the plug.
•
Do not use extension cords or
ungrounded (two-prong) adapters.
•Donotuseapowercordthatisfrayedor
damaged.
•
Do not use a power strip.
Failure to follow these instructions may
result in fire, electric shock or death.
Loading ...
Loading ...
Loading ...