Loading ...
Loading ...
Loading ...
5
- This appliance is lled with a precise quantity of oil and
repairs requiring it to be opened must be carried out by the
manufacturer or an authorised technical assistance centre
only. In the event of oil leaks, please contact Customer
Experience, see enclosed guarantee.
- As with any electrical appliance, whilst the instructions
aim to cover as many eventualities as possible, caution
and common sense should be applied when operating your
appliance, particularly in the vicinity of young children.
- A safety device will turn the radiator o. To reset, contact
the technical assistance service.
The appliance complies with the following EC directive:
- EEC Directive on electromagnetic compatibility (EMC)
and subsequent amendments;
INTRODUCTION
Thank you for choosing a De’Longhi product.
Please take a few minutes to read these instructions.
This will avoid all risks and damage to the appliance.
DESCRIPTION
(see figure on pag. 3).
A Thermostat
B Switches
C Timer (only in certain models)
D Cord holder
E Wheel
USE
Electrical connection
- Before plugging the radiator into the mains, check that
the voltage of your mains electricity supply corresponds
to the value V indicated on the appliance and that the
socket and power line are appropriately dimensioned.
- CONNECT THE RADIATOR TO EFFICIENTLY EARTHED SOCK-
ETS ONLY.
- This appliance complies with directive on electromag-
netic compatibility.
Models “Easy wheel” sytem
Turn the radiator upside-down on a rug or a soft surface in
order to prevent damaging the paint nish.
Fully unfold the castors by turning them outwards (Fig.1).
Turn the radiator back to its upright position.
Models without “Easy wheel” sytem
Remove the feet and the castors from the polystyrene pack-
ing. Insert the threaded u-bolt as shown in gures 2, 3 and 4
and use wing nuts to x the feet to the bottom of the radi-
ator between the last two elements, then t the castors to
the spindles on the feet and push rmly until they click into
position (g. 5-6).
Pull each castor to check that it is tted correctly.
In certain models, the castors are already mounted on the
feet.
Important!
When in use, the radiator should always be kept vertical
(wheels at the bottom, controls at the top). Any other posi-
tion could be dangerous!
INSTRUCTIONS FOR USE
Switching on
Turn the thermostat dial clockwise to maximum (6).
Turn on both switches. The lights on the switches remain on
until the room temperature reaches the set temperature,
then, they will switch o.
When the room reaches the required temperature, turn the
dial anticlockwise slowly until you hear a click and the lights
will switch o.
The appliance will come on and go o automatically to main-
tain the required temperature.
- button in position «MIN» = minimum power (indicator
light on);
- button in position «MED» = intermediate power (indi-
cator light on);
- both buttons in position «MIN» «MED» = maximum
power (indicator lights on)
Using the thermostat
The thermostat operates on the basis of room temperature
and not radiator temperature.
Turn the thermostat dial anticlockwise towards the lower
numbers to reduce the temperature; turn it clockwise to-
wards the higher numbers to raise the temperature. To turn
the appliance o completely, turn the thermostat to mini-
mum and unplug from the mains.
Frost protection function
With the thermostat in position and the switches pressed,
the appliance maintains the room at a temperature of about
5˚C, preventing freezing with minimum energy consump-
tion.
HOW TO USE THE TIMER (only in certain models)
To program heating, proceed as follows (g.7):
- Look at the time on your clock or watch. If it is 10 p.m.,
Loading ...