Kenmore 10670182000 top-mount refrigerator

User Manual - Page 17

For 10670182000.

PDF File Manual, 80 pages, Download pdf file

Loading ...
Loading ...
Loading ...
©oo
..................
The door bins are removable for easy cleaning and
adJusting.
1. To remove the bin, simply lift the bin up and pull
straight out.
2. To replace the bin, slide it in above the desired
support button and push down until it stops.
To adjust the utility compartment or tray:
1. Lift the front slightly.
2. Slide to desired position.
3. Lower front to lock into place.
%v
s_,,, SO_FI@
The utility compartment and tray slide from one side to the
other for more flexible storage, The tray fits on either side
of the utility compartment or partially underneath it. Try
moving it into different places to find the option that works
best for you.
To install the utility compartment and tray:
1. Insert the front of the utility tray into the slot on the
back of the shelf rail, Lower the back of the tray into
position,
2. Place the front of the utility compartment on top of the
shelf rail, Lower the back of the compartment onto the
ribs on the refrigerator door,
I -F . ........
The shelf bottom flips up so you can store taller items in
the door shelf below, When in the down position, the shelf
is strong enough to hold up to 10 pounds (4.5 kg).
Opg,[ l . O=I
After the freezer section reaches normal freezer
temperature, the ice maker fills with water and begins
forming ice. Allow 24 hours to produce the first batch of
ice. Ice maker should then produce approximately 7 to 9
batches of ice in a 24-hour period. Discard the first three
batches of ice produced to avoid impurities that may be
flushed out of the system.
The ON/OFF lever for the ice maker is a wire shut-off arm
located on the side of the ice maker, Push the wire shut-off
arm down to start making ice automatically, and push it up
to shut off the ice maker
After ice is made, the ice cubes drop into the storage bin.
When ice storage bin is full, the wire shut-off arm raises to
the OFF position (arm up). If ice is not needed, you can
stop the ice maker by raising the wire shut-off arm to the
OFF position (arm up). Listen for a click sound to be sure
that the ice maker will not continue to operate.
17
Loading ...
Loading ...
Loading ...