Loading ...
Loading ...
Loading ...
Installation
Preparation
Ensure that there are no electric wires, gas or water pipes in the area where holes
are to be made.
1. Ensure that there is an electrical plug socket within adequate distance of the
hood after it has been installed.
2. Mark a vertical centre line on the wall from the ceiling to the worktop in the
centre of the area that the cooker hood is to be fitted.
3. Mark 3 horizontal lines on the wall in the following positions:
A. A horizontal line A at 970 – 1070 mm above the cooker top
B. A horizontal line B at X mm above the horizontal line A.
C. A horizontal line C at a 243 mm below the horizontal line A .
4. Mark the positions for the screws and the contour of the attachment area.
Always ensure that the marks are level with a spirit level.
1. Mark 2 points (1) on the horizontal line A, 80 mm either side of the
vertical reference line.
2. Mark 2 points (2) on the horizontal line B, 60 mm either side of vertical
reference line.
3. Mark a point (3) on the horizontal line C, 100 mm either side of
vertical reference line.
5. Drill holes at the marked points and insert the wall plugs:
1. 3 x 10mm Ø holes to a depth of 50mm for the hood fixing bracket and
press the wall plugs flush with the wall. Horizontal line A.
2. Drill 2 x 10mm Ø holes to a depth of 50mm for the wall mounted flue
duct fixing bracket and press the wall plugs flush with the wall (at the
appropriate height and will depend on the height of the ceiling).
Horizontal line B.
3. Drill 2 x 10mm Ø holes to a depth of 50mm for the safety screws.
Horizontal line C.
6. Screw on the hood and wall mounted flue duct fixing brackets with the large
screws.
11
Loading ...
Loading ...
Loading ...