Loading ...
Loading ...
Loading ...
5
• To generate a constant ow of steam without holding the trigger, press the steam trigger and then
slide the steam trigger lock downwards. You can then release pressure on the steam trigger. To turn
the steam o, press the trigger, slide the steam trigger lock upwards, then release the trigger.
7. With your free hand keep the fabric taut. Steam the garment with slow, downward strokes, keeping
the head of the steamer in contact with the fabric.
8. Switch the appliance o (O) and unplug it.
9. Stand the steamer on its base and allow it to completely cool o before storing. To avoid mineral
buildup, empty the tank after each use.
CARE AND MAINTENANCE
1. Make sure steamer is o, unplugged and completely cool.
2. Wipe all surfaces with a clean damp cloth.
3. After the steamer has been thoroughly dried, turn it back on and lightly steam over an old cloth. This
will help remove any residue left in the steam holes.
4. To avoid mineral buildup, empty the tank after each use.
• Wipe the lint attachment with a damp cloth to clean it.
TROUBLESHOOTING
Problem Possible Cause Solution
Not enough steam or no steam is
coming out of the steamer.
The steamer is not heated to full
temperature.
Always allow steamer to preheat
at least 45 seconds.
There is not enough water in the
water tank.
Fill the water tank.
The water pump hasn’t been
primed.
After preheating, always prime
the water pump by holding the
steam trigger until steam forms.
Discoloured water is coming
through the holes and staining
the fabric.
Residue has built up in the water
tank.
Empty the water tank after each
use. Only use distilled, ltered, or
puried water.
Perfumed or scented additives
were used.
Never use perfumed or scented
additives.
Steamer is leaking or spitting. Steamer is not hot enough. Allow the steamer to heat for
about 45 seconds.
Water tank is running low. Fill the water tank.
Loading ...
Loading ...
Loading ...