Loading ...
Loading ...
Loading ...
Operating Instructions
BEVERAGES
a) Press " BEVERAGE " repeatedly until the number you wish appears in
the display, "1","2","3" cup will display in order. One cup is about
120ml. For example, press "BEVERAGE" once , "1" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds once.When cooking
finish,buzzer sounds five times and then turn back to waiting state.
DINNER PLATE
a) Press " DINNER PLATE " repeatedly until the number you wish appears
in the display, "9.0","12.0","18.0" oz will display in order.
For example, press "DINNER PLATE" once , "9.0" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds once.When cooking
finish,buzzer sounds five times and then turn back to waiting state.
PIZZA
a) Press " PIZZA " repeatedly until the number you wish appears in the
display, "4.0","8.0","14.0" oz will display in order.
For example, press "PIZZA" once , "4.0" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds once.When cooking
finish,buzzer sounds five times and then turn back to waiting state.
MEMORY CLOCK
1) Press "0/MEMORY" to choose memory 1-3 procedure. The LED will
display 1,2,3.
2) If the procedure has been set, press " START/ +30 SEC." to use it. If
not, continue to set the procedure. Only one or two stages can be set.
3) After finishing the setting, press "START/ +30 SEC." once to save the
procedure and turn back to the waiting states.If press " START/ +30
SEC." again,it will start cooking. Example: to set the following procedure
as the second memory, that is memory 2. to cook the food with 80%
microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "0/MEMORY" twice,stop pressing until the
screen displays "2".
b. Press "TIME COOK" once,then press "3","2","0" in order.
c. Press "POWER" once,"PL10" display,then press "8" and "PL8" displays.
d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once then
turn back to waiting states. If you press "START/+30SEC." again, the
procedure will be saved as the memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If
it is, the procedure need to reset.
f. If you want to run the saved procedure, in waiting states, press
"0/MEMORY" twice, screen displays "2", then press "START/+30SEC."
to run.
11
Loading ...
Loading ...
Loading ...