Loading ...
Loading ...
Loading ...
9
Installation and Assembly
Ensuring Proper Airow
Proper airow MUST be maintained for the grill to perform as it was designed. If airow is
blocked, overheating will result. Do not block more than 75% of the cooking grid surface with
pans or griddles.
WARNING: NEVER cover the entire cooking or grill surface with griddles or pans. Overheating
of the electronic components will occur.
CAUTION: DO NOT operate this grill with air blowing into or across the rear oven lid vent. is
can c
ause poor performance and/or dangerous overheating. Orient the grill so that any
prevailing wind blows against the front of the grill.
Extension Cords
Use only a 14-gauge extension cord with a 3-prong plug suitable for use with outdoor
appliances. Outdoor extension cords should be used with outdoor products and are surface
marked with sux letter “W” and with a tag stating “Suitable for use with outdoor appliances”.
e maximum length allowed for the extension cord is 25 feet. Do not use damaged extension
cords. Examine extension cord before use and replace if damaged. Keep cord away from heat
and sharp edges.
Important: Connection to an extension cord must be kept dry and off the ground.
Connecting to Electrical Outlet
is electrical appliance is equipped with a 3-pronged (grounding) plug for your protection
against shock hazard and should be plugged directly into a properly grounded, 3-prong GFI
protected receptacle. Located on its own 20 Amp dedicated Circuit. The appliance should be
supplied through a residual current device (RCD) having a rated residual operating current not
exceeding 30 mA. Do not cut or remove the grounding prong from the plug.
Do not operate any appliance with a damaged cord or plug, or after an appliance malfunction.
Return the appliance to your dealer or authorized service facility for inspection, repair, or
electrical/mechanical adjustment.
*Important: To ensure optimal grill performance verify unit is plugged into its own dedicated
20 amp circuit.
Loading ...
Loading ...
Loading ...