Loading ...
Loading ...
Loading ...
17
10
9
Attach smokestack to end of smoke chamber by
sliding stack into smokestack mounting bracket. While
holding the smokestack in a vertical position, tighten
the 3/8-16×1" hex-head bolt. Then slide the pull
handle into the brackets welded to smoke chamber.
Install two 1/4-20x1/2” Hex Washer Head bolts into the
ends of the handle as shown. TIGHTEN THE BOLTS
SECURELY!
Attach handle to smoke chamber lid and firebox lid using eight 1/4-20×½" screws and 1/4-20 flange nuts. Tighten securely.
Smoke Stack
3/8-16x1”
Hex Head Bolt
Smoke Chamber handle shown installed.
Smoker Chamber
1/4-20
Flange
Nuts
1/4-20x1/2" Screws
1/4-20x1/2” Hex Washer Head Bolts TIGHTEN SECURELY!
Pull Handle
Adjuntar manejar al humo tapa de la cámara y la tapa del fogón con ocho 1/4-20 x ½ "tornillos y tuercas de 1/4-20. Ajuste con
firmeza.
Cámara de humo manejar muestra instalada.
Cámara fumador
1/4-20
Brida
nueces
1/4-20x1/2" tornillos
3/8-16x1”perno de cabeza
hexagonal
Chimenea
Tire de la manija
1/4-20x1/2" Hex Lavadora Cabeza APRIETE DE FORMA SEGURA!
Adjuntar chimenea al final de la cámara de humo,
deslizando la pila en el soporte de montaje de
chimeneas. Mientras mantiene la chimenea en una
posición vertical, apriete el 3/8-16x1" tornillos de
cabeza hexagonal. A continuación, deslice la
empuñadura lateral en los soportes soldados al humo
de la cámara. Instale dos tornillos de 1/4-20x1/2" Hex
Lavadora Cabeza en los extremos de la manija como
se muestra. Apriete de forma segura!
Loading ...
Loading ...
Loading ...