Loading ...
Loading ...
Loading ...
7
CONTROL PANEL OPERATION
• EVA. / COOLER: Press this button to activate or disable
evaporative cooling. While evaporative cooling is active, the
pump will pull water from the tank and run it through the
cooling pad, increasing the cooling power of the unit. If disabled,
the unit will simply operate as a tower fan. If the water drop icon
is illuminated constantly, then evaporative cooling is operating
normally. If the icon is flashing, then the water tank needs to be
refilled. Note: Do not run evaporative cooling mode if the
water tank is empty. If you do, the water pump may be
damaged.
• MODE: Press this button to cycle between operation modes.
When the leaf icon is illuminated, the unit is in nature mode,
which will cause the unit to simulate a shifting natural breeze.
When the moon icon is illuminated, the unit is in sleep mode,
which will cause the unit to gradually decrease fan speed over
time. If no icons are illuminated above the mode button, then
the unit is operating in normal mode.
• TIMER: Press this button to enable an automatic shutoff after a
specific amount of time. Select between 1 and 12 hours by
pressing the button until the correct quantity of hours is
illuminated in the time icons above the timer button. Note: If
you set the timer while the unit is off, the unit will turn on (at
the chosen fan speed) after that time has elapsed.
• SPEED: Press this button to change the speed of the fan
between the three options.
• OSC.: Press this button to enable the oscillation feature. When
enabled, the louvers on the front vent of the fan will move back
and forth, increasing the coverage of the fan.
MODE
Loading ...
Loading ...
Loading ...