Loading ...
Loading ...
Loading ...
36
VQT5K30
FRONT, SURROUND
Attach to a wall with the bottom cover.
≥ [BTT885] Before using the speaker cable,
remove it from the stand by pulling it out.
∫ [BTT885]
Reattaching the speaker cable to the stand
1 Remove the front cover.
2 Thread the speaker cable through the stand,
and press the cable into the grooves.
3 Perform step 1 in reverse order to attach the
front cover.
Secure the speaker.
Using the tie down area on the rear of the speaker
and a cord (not supplied), secure the speaker to a
wall anchor (not supplied) permanently attached
to the wall.
1 Thread a cord to the speaker.
≥ Use a cord of less than ‰ 2.0 mm, which is
capable of supporting over 10 kg.
e.g., Front speaker
A Cord (not supplied)
2 Thread a cord from the wall to the speaker
and tie tightly.
B Wall anchor (not supplied)
C Wall or pillar
D Approx.150 mm
E Approx.100 mm
D 50 mm
E 106 mm
F 150 mm
160 mm
To prevent tipping/falling of
the speakers
When mounted on a wall
When placed on the floor
SC-BTT885&505GNGA-VQT5K30_mst.book 36 ページ ２０１４年３月１８日 火曜日 午前１０時４分
Loading ...
Loading ...
Loading ...