Patriot Lighting 20688 Owner’s Manual

Loading ...

ASSEMBLY INSTRUCTIONS

13. Install the blade arm to the underside of the motor

assembly with previously removed motor screws. Tighten

each blade arm completely before moving to the next.

Note: The notch in the tter plate allows a Phillips

screwdriver access to the motor screws.

14. Remove the three tter plate screws preassembled to

the tter plate. Connect the single-pin connector from

the tter plate to the single-pin connector from the light

kit--blue to black and white to white. Secure the light kit

with the tter plate screws.

15. Remove the socket ring from each socket. Raise the

glass shade over the socket of the light kit. Secure the

glass shade by twisting the socket ring clockwise. Repeat

for each socket.

16. Install the E26-base LED bulb into the socket of the

light kit.

Important: Make sure you allow the bulb and light kit to

cool before you replace the bulb.

Fitter Plate

Socket Ring

Glass Shade

Fitter Plate

Screw

Motor Screw

Blade Arm

Notch

Bulb

Light Kit

Single-pin

Connector

Loading ...

Patriot Lighting 20688 Tisbury II 52" Brushed Nickel Indoor LED Ceiling Fan