Loading ...
Loading ...
Loading ...
14
N
OTE: Do not use ambient burner as a wood fire
starter to avoid clogging the burner orifices
VIII. Shutting Down Instructions
To shut down the burner control systems for a period of
time, turn “OFF” the main electrical supply and place
the main panel ON/OFF switch and ambient burner
circuit ON/OFF switch to the “OFF” position.
To shut down the burner control systems for longer
than a week, turn “OFF” and “LOCK OUT” the main
electrical supply to the burner systems and turn “OFF”
and “LOCK OUT” the incoming gas supply gas cock.
Gas/Electric Installation Continued
VI. Hearth Burner Lighting Instructions READ
INSTRUCTIONS BEFORE LIGHTING
First, confirm the area is clear of excess gas
• Set main gas supply cock in “OFF” position.
• Turn main electrical supply “OFF.”
• Wait at least (5) five minutes.
Next:
• Set main gas supply cock in “ON” position.
• Turn main electrical supply “ON.”
• Set temperature control to desired settings
• Place Hearth burner ON/OFF switch in “ON”
position.
• **If burner does not light, repeat above steps.
Note: The hearth burner system is controlled by
the thermostat.
VII. Ambient Burner Lighting
Instructions
• Set main gas supply cock in “ON” position.
• Turn main electrical supply “ON.”
• Place Ambient burner ON/OFF switch in “ON”
position.
• If burner does not light, repeat steps 1-3.
Loading ...
Loading ...
Loading ...