Loading ...
Loading ...
Loading ...
7
• The appliance is only to be used with the power supply unit
provided with the appliance.
• The battery must be removed from the product before
cleaning or maintaining the appliance.
• The appliance must be disconnected from the supply mains
when removing the battery.
• The wall mount must be fixed to a wooden or masonry/
concrete wall using provided fasteners(hardware). The
fixing point must be capable of supporting the weight
of the product. For cavity walls or plasterboard use
fasteners(hardware) that are available at your local store.
• When drilling holes, make sure that you do not damage any
electrical cables or water pipes behind the wall. Use voltage/
metal detector if in doubt.
• Check and tighten the screw connections regularly.
• Never use the vacuum cleaner without the filter installed. This
could damage the motor and shorten the life of the product.
• Never suck up water (or any other liquids).
• The brush roll in the floor nozzle rotates at high speed. This
poses various dangers to people, animals and objects:
– Never use the floor nozzles on people, animals or plants.
Keep body parts and clothing away from the brush roll and
the opening of the floor nozzle.
– Switch off the appliance before attaching, removing and
cleaning the floor nozzle.
– Do not run over cables, wires, etc., as these can get
entangled in the rotating brush roll and could be damaged.
– Do not use the floor nozzle on sensitive surfaces.
– Observe the cleaning and care instructions of the floor
manufacturer.
WARNING
Risk of fire! Do not pick up hot, glowing or
burning ash.
Loading ...
Loading ...
Loading ...