Loading ...
Loading ...
Loading ...
8
Getting Started
1. Load Dishwasher (See Preparing
and Loading Dishes).
2. Add detergent (See Dishwasher
Dispenser & Detergents).
3. Add Rinse Aid, if needed (See Rinse
Aid).
4. Run hot water faucet nearest
dishwasher until water is hot. Turn
water o.
5. Select desired Cycle (See Cycle
Chart).
6. Select desired Option (See Option
Selections).
7. To start, press START/Cancel pad
and close door immediately.
To Start a Cycle
When cycle and options are selected,
LEDs of selected cycle and options are
illuminated. The status window displays
the cycle time and the LED above the
START/Cancel button illuminates.
To start the cycle, press START/Cancel
button and immediately close the
dishwasher door.
The status window displays “CLOSE door”
after the START/Cancel button is pressed.
The energy required to use the
MaxBoost Dry
TM
option costs
pennies per cycle. You may choose
not to select the MaxBoost Dry
TM
option; however you may have
items in your dish load that will not
be completely dry at the end of the
cycle.
Heat Dry/Air Dry
Use of the Heat Dry option,
especially in combination with use
of rinse agent, will enhance drying.
If Air Dry is selected the heater will
be de-activated during the drying
phase of the selected wash cycle.
This will slightly lower the energy
use but will increase the likelihood
that the dishware will not dry
completely.
Child Lock Controls
Lock the dishwasher controls
by pressing and holding the Dry
button until the lock icon comes on
to prevent children from starting
the dishwasher or accidentally
changing the wash cycle. To unlock
the controls, press and hold the Dry
button until the lock icon goes o.
7
Delay Time
The Delay Time option allows you
to automatically delay starting your
dishwasher 1-24 hours.
To start the Delay Time option,
press Delay Time until the desired
delay time shows in the Status
window. Press the START/Cancel
button to start the delay option. If
the delay option is interrupted, the
START/Cancel button will have to
be pressed again to return to delay
option.
To cancel the Delay Time option
and to begin the selected cycle
before the delay period is over,
press and hold START/Cancel
button for 3 seconds.
OPERATING INSTRUCTIONS
Loading ...
Loading ...
Loading ...