Loading ...
Loading ...
Loading ...
16
Check for Proper Damper Operation
• Place the microwave in its
upright position, with the top
of the unit facing up.
• The exhaust adaptor is only
used for top and outside back
exhaust. It is absent for
models shipped for
recirculation exhaust.
• Make sure the tape securing
the damper is removed and
the damper pivots easily
before mounting the microwave.
• Attach the exhaust adaptor to the blower plate by sliding it into the guides. Secure the adaptor
with a provided sheet metal screw.
• You will need to adjust the damper ensure proper alignment with your house exhaust duct after
the microwave is installed.
Mount the Microwave
For easier installation and personal safety, we recommend that two people install this microwave
oven.
CAUTION: Do not grip or use the handle during installation. Also, if filler blocks are not used,
damage to the microwave case may occur from over tightening screws.
NOTES:
• If your cabinet is metal, use the nylon grommet around the power cord hole to prevent the cutting
of the cord.
• We recommend using filler blocks if the cabinet front hangs below the cabinet bottom shelf.
• When mounting the microwave oven, thread power cord through hole in bottom of top cabinet.
Keep it tight throughout Step 1-3. Do not pinch the power cord or lift the oven by pulling cord.
Loading ...
Loading ...
Loading ...