Loading ...
Loading ...
Loading ...
INSTALLATION REQUIREMENTS
If you use an existing wall sleeve, you should
measure its dimensions.
Install the new air conditioner according to these
installation instructions to achieve the best
performance. All wall sleeves used to mount the
new air conditioner must be in good structural
condition and have a rear grille to securely attach
the new air conditioner. (FIG. 1)
With the Kenmore folding sleeve, you can
maintain the best performance ofthe new air
conditioner,
19_V32"
(499 mm) 24-21/32''
[626 mm)
14.13/32"
(366mm}
8"(458mm)
Air Conditioner FIG. 1
ELECTRICAL SERVICE
Check your available electrical service. The power
supply available must be the same as that shown
on the unit nameplate (found on left side of cabinet).
All models are equipped with a 3-prong service plug
to provide proper service and safe positive
grounding. Do not change plug in any way. Do not
use an adapter plug. If your present wall outlet does
not match your plug, call a qualified electrician to
make the necessary corrections. SAVE CARTON
for storage and this OWNER'S MANUAL for future
reference. The carton is the best way to store unit
during winter or when not in use.
INSTALLATION HARDWARE
2 Sizeoptions
ITEM NAMEOF PARTS QITy
PLASTIC GRILLE 1
_) HORIZONTAL INSULATION STRIPS 2
AROUND INSULATION STRIPS 2
SUPPORT BLOCK 2
_) BAFFLE I
(_) TRIM FRAME 2
(_ SHIM 2
_) PLASTICNUTSANDWASHERSCREWS 4
To avoid risk of personal injury, property damage,
or product damage due to the weightof this
device and sharp edgesthat may be exposed:
Air conditioners covered in this manual pose an
excessiveweight hazard.Two ormore people
are needed to move and installthe unit.
To prevent injury or strain, use proper lifting and
carrying techniques when moving unit.
• Carefullyinspect location whereair conditioner
will be installed.Be sureit will support the weight
ofthe unitover an extendedpedod oftime.
• Handle air conditioner with care. Wear
protective gloves whenever lifting or carrying the
unit. AVOID the sharp metal fins of front and
rear coils.
• Make sure air conditioner does notfall during
installation.
REQUIRED TOOLS:
• Tight Fitting gloves
• Standard screwdriver
Phillips screwdriver
Pliers
Sharp knife
• 3/8-inch open end
wrench or adjustable
wrench
• 1/4-inch hex socket
and ratchet
• Tape measure
• Electric drill
• 1/4-inch drill bit
-5-
Loading ...
Loading ...
Loading ...