Loading ...
Loading ...
Loading ...
7.
CONTROLS AND
INDICATORS
A
C
12
1
2
3
4
5
6
7
8
A-Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B- Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C-Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
2.Delay Start Button
3.Time cycle selection
4.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the
cycle:
- Ready to Iron : It leaves the garments
slightly wet to facilitate ironing.
- Dry Hanger : To get garment ready to be
hang
- Dry wardrobe : For laundry that can be
directly stored
-Extra-dry : To get completely dry garments,
ideal for full load.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
5.Rapids Button
6.Best Ironing
7.Memory
8. Keylock
B
D
Delay the start of a program from 1 to 24
hours, the time will increase in 1 hour intervals.
The delay start selected will be shown on the
display. To begin the delay start press the start
button, time until the cycle beings will be
display, decreasing each hour. If the door is
opened while delay start is set the delay start
countdown will pause, to resume press the
start button once the door has been closed.
If an automatic program has been selected it
can be changed to Rapid program within the
first 3 minutes of a cycle. The progressive
pressure increases the time(30-45-59minutes).
If the load is incompatible all LEDs will flash
quickly 3 times, the dryer will need to be turned
off and an automatic drying function selected.
This feature reduces folds and creases as the
drum alternates direction during and after the
cycle. This option can be selected within the
first 5 minutes of the cycle, it will only activate
on automatic cycles.
This feature allows the options selected on a
cycle to be stored. To store, during the cycle
push the "memory" button for 3 seconds, the
memory light on the display will flash 3 times
indicating that the selected options have been
stored. To use saved options, selected the
desired cycle and then push the "memory"
button.
This feature prevents unwanted changes
during the drying cycle. To activate or remove,
push buttons 4 and 5 for approximately 2
seconds simultaneously. When activated
‘LOC’ will display and when the feature is
turned off ‘UNL’ will flash on the display.
Opening the door while the key lock is
activated will only stop the cycle. To resume
the cycle, close the door, turn off the key lock
feature and press the start button. If the dryer is
turned off the key lock will automatically be
inactivated. The key lock can be activated or
removed at any point during the cycle.
It's possible to modify the time-cycle up to 3
minutes after the cycle start (cycle will change
from automatic to programmed).
The progressive pressure of this button
intervals. After this selection, to reset the
automatic drying functioning, is necessary to
switch off the dryer. In case of incompatibility,
all LEDs flash quickly 3 times.
minutes increases the time-cycle by 10
Loading ...
Loading ...
Loading ...