Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/74108258-scp-2254bk-eue4/bg5.png)
- 5 -
09/2020
Copyright © 2020, Fast ČR, a.s.
■ If the power cord is damaged, it must be replaced
by the manufacturer, its service technician or by
asimilarly qualified person, as this will prevent
adangerous situation from arising.
■
Do not use the appliance when it is not functioning
correctly or after it has fallen on the floor, been
submerged in water or is damaged in any other
way. Hand it over to an authorised service centre
for inspection or repair.
■ In order to prevent ahazardous situation arising,
do not repair the appliance yourself or modify
it in any way. Have all repairs performed at an
authorised service centre. By tampering with
the appliance, you risk voiding your legal rights
arising from unsatisfactory performance or quality
warranty.
■ Prior to using this appliance, please read the user’smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual. Keep
this user’smanual in asafe place where it can be easily retrieved for future reference.
■
We recommend saving the original cardboard box, packaging material, purchase receipt
and responsibility statement of the vendor or warranty card for at least the duration of
the legal liability for unsatisfactory performance or quality. In the event of transportation,
we recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Large hotplate, diameter 18 cm
A2 Indicator light
signals operation of large hotplate.
A3 Temperature control knob
serves to control the large hotplate.
A4 Small hotplate, diameter 15 cm
A5 Indicator light
signals operation of small hotplate.
A6 Temperature control knob
serves to control the small hotplate.
BEFORE FIRST USE
■
Remove all packaging materials, including promotional tags and labels from the
appliance.
■
Wipe the surface of the appliance with aclean, lightly dampened cloth. Then wipe it dry.
OPERATING THE APPLIANCE
■
Place the appliance on akitchen countertop or on atable within reach of apower socket.
At the same time, make sure that all safety instructions are followed.
■
Make sure that the temperature control knob A3 and A6 is set to position MIN and
that there are no foreign objects are located on the hotplate A1 and A4 and that its
surface is clean.
■
Fully unwind the power cord and connect it to apower socket. Since the appliance
heats up during operation, the power cord must be located in such away that it is not
touching the surface of the appliance.
■
Place apot or pan on the appropriate hotplate. To achieve optimal power consumption
and cooking time, use cookware with aflat base, the diameter of which corresponds
to the size of the hotplate. Place foodstuffs into the pot or pan.
■ Set the required temperature level using the appropriate temperature control knob.
For quickly bringing the contents to aboil, use the highest level MAX, for frying we
recommend setting level 5, for maintaining aboil, set the medium levels 3 to 4 and for
keeping food warm, use the low levels 1 to 2. The temperature level can be changed
at any time during operation as required. During operation the thermostat switches
the hotplate on and off to maintain the set temperature. The indicator light A2 and A5
signals the thermostat switching on and off.
■ Regularly check the condition of the food while the hotplate is running. Do not leave
the appliance without supervision when it is in operation.
Note:
When rst turned on, asmall amount of smoke may be emitted. This is an
entirely normal event, which will disappear after afew minutes.
■ When the meal is finished, set the appropriate temperature control knob to position
MIN and disconnect the power cord from the power socket.
■
Always after finishing using the appliance, make sure that both the temperature control
knobs A3 and A6 are set to position MIN and that the power cord is disconnected
from the power socket.
■
Allow the appliance to fully cool down and then clean it according to the instructions in
chapter Cleaning and maintenance. Keep in mind that the appliance will emit residual
heat for acertain time after it is used. Do not touch the hot surface. There is adanger of
burns. Never move the appliance unless it has cooled down completely.
CLEANING AND MAINTENANCE
■
Clean the appliance after every use. Makes sure that dried on food or other residues do
not accumulate on it. Before cleaning it, always set the temperature control knob A3
and A6 to position MIN, disconnect the power cord from the power socket and allow
the appliance to cool down completely.
■ To clean the hotplate A1 and A4, use asoft, lightly dampened textile. Then wipe the
hotplate A1 and A4 dry.
■
To clean the surface around the hotplates A1 and A4 use asoft, lightly dampened textile.
In the event of greater soiling, use asmall amount of neutral kitchen detergent. Remove
any remaining detergent using aclean, lightly dampened cloth. Then thoroughly wipe
the cleaned surface until dry.
■
Do not use steel wool, solvents, cleaning products with an abrasive effect, etc. to clean
the appliance. Otherwise the surface coat of the appliance may be damaged.
■
To prevent the risk of injury by electrical shock, do not submerge the appliance, power
cord or power plug into water or another liquid.
■ Discolouration of the surface of the appliance may occur after acertain period of use.
However, this does not have any effect on the functionality of the appliance.
STORAGE
■
Place the cooled and thoroughly cleaned appliance in aclean, dry place out of
children’sreach.
TECHNICAL SPECIFICATIONS
Rated voltage range ....................................................................................................................... 230 V
~
Rated frequency..................................................................................................................................50 Hz
Rated power input ........................................................................................................................ 2,500 W
Weight ...................................................................................................................................................4.0 kg
Changes to text and technical parameters are reserved.
Loading ...