Loading ...
Loading ...
Loading ...
10
● Remove the grease lter, and carefully remove 2 screws from the front plate (a cross headed
screwdriver will be needed to remove the screws).
● Disconnect the terminal of LED light.
● Press LED light at the back of the front plate, and take it out.
● Replace the light (commercially available LED light (max. 1.5 w)
Max Power Voltage Picture Light Cap ILCOS D Code
Round/ Diameter:
70 mm
1.5 W DC 12 V
— — DSR-1.5-S-70
Reinstalling LED light module
● Press LED light in the front of the front plate, and install the LED light onto the front plate.
● Connect the terminal of LED light and light leads.
● Carefully fasten 2 screws on the front plate, and reinstall the grease lter.
Loading ...
Loading ...