Loading ...
Loading ...
Loading ...
15
OPERATING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Remove and safely discard any packaging
material or promotional labels attached to
your kettle. It is recommended that before
first use to fill the kettle to the maximum
level with cold tap water, bring to the boil
by selecting the BOIL 100°C button, then
discard the water. Your kettle will only
operate when positioned on the power
base. The kettle will automatically switch
off when the water has reached the selected
temperature.
OPERATION OF YOUR KETTLE
1. To fill the kettle, remove it from the
power base and open lid by pressing the
lid release button. Fill with the desired
amount of water.
NOTE
Always fill the kettle between the
minimum (500ml) and maximum
(1700ml) marks on the water window.
Too little water will result in the kettle
switching Off due to the safety boil dry
protection. Filling above the maximum
mark (MAX) may result in boiling
water splashing from the kettle.
2. Ensure the lid is closed and locked
firmly into place. Position the kettle
securely onto the power base. Insert the
power plug into a 230/240 power outlet
and switch on. The START/CANCEL
and 100°C BOIL button surrounds will
illuminate in white for one minute.
A beep will sound for two seconds.
The START/CANCEL button surround
will automatically switch off after one
minute if not selected.
NOTE
If the START/CANCEL button is
pressed (before selecting a temperature
button), the START /CANCEL button
surround will illuminate in red and the
100˚C button surround will illuminate
and the kettle will start heating.
3. Select the desired setting by pressing
one of the five temperature buttons
(80°C, 85°C, 90°C, 95°C, 100°C).
The selected button and the START/
CANCEL button surround will
illuminate in white.
NOTE
The KEEP WARM function can be
selected before, during or on
completion of the water heating cycle
(refer page 11).
4. Press the START/CANCEL button and
the surround will illuminate in red, the
selected temperature button surround
will illuminate and the kettle will start
heating. Do not remove the kettle from
the power base during operation. Ensure
the kettle has switched off after the water
has boiled or the selected temperature
has been reached before removing the
kettle from the power base. If the kettle
is removed from the power base during
the KEEP WARM function the kettle will
automatically switch off.
NOTE
As the kettle begins to heat the water,
you may notice a short pause in
operation. This is normal.
OPERATING YOUR BREVILLE PRODUCT
5. When the kettle has heated the water to
the selected temperature, 3 beeps will
sound, the START/CANCEL button
surround illumination will switch off,
and the selected temperature button
surround will remain illuminated for
1 minute before switching off.
6. If the KEEP WARM function has been
selected, the KEEP WARM button
surround will remain illuminated in
red, the selected temperature button
surround will remain illuminated in
white, and the kettle will maintain the
desired setting for 20 minutes.
7. If further heating of the kettle is not
required, switch Off at the power outlet,
unplug the power cord and empty the
water from the kettle. Replace the kettle
onto the power base and close the lid.
NOTE
The default temperature setting of the
kettle when switched On at the power
outlet is 100°C.
− When the kettle is switched Off at
the power outlet and switched back
On, it will automatically default to
the 100°C temperature setting.
− When the kettle remains switched
on at the power outlet and different
temperature settings have been
selected, the kettle will default to the
last selected temperature setting.
WARNING
Do not open the lid during and after
operation. This may result in boiling
water splashing from the kettle. Pour
all the hot water from the kettle before
opening the lid to refill.
NOTE
This kettle must be used only
with the power base supplied. Use
caution when pouring water from
your kettle, as boiling / heated water
and steam will scald. Do not pour the
water too quickly.
NOTE
Always fill the kettle to between the
minimum (MIN 500) and maximum
(MAX 1700) marks on the water
window on the kettle. Filling above the
maximum mark on the water window
of the kettle may result in boiling/
heated water splashing from the kettle.
SAFETY BOIL DRY PROTECTION
The kettle is fitted with a safety device,
which protects against overheating should
the appliance be operated with insufficient
water. If this occurs the kettle will stop
heating. Switch Off at the power point and
allow kettle to cool before refilling. The
safety device will automatically reset when
the kettle has cooled down.
WARNING
This appliance is designed for boiling
or heating of drinking quality water
only. Never use it to heat or boil any
other liquids or foodstuffs. Never insert
tea or coffee into the kettle. The lid
should always be locked securely into
the closed position before use.
Loading ...
Loading ...