Loading ...
Loading ...
Loading ...
7
• Low Speed
• Medium Speed
• High Speed
3. OSCILLATION: To turn on the oscillation feature, press the “OSC”
button once. The indicator will appear on the display. Press the “OSC”
button again to turn off the oscillation feature.
4. TIMER: The unit comes with a 10-hour timer (max. 10 hours). To set
the timer, press the “Timer” button. Each time the “Timer” button is
pressed, 0.5 hour of operation time is added. To have the unit run
continuously, make sure the timer is off.
• Press once – 0.5 hour
• Press twice – 1 hour
• Press 3 times – 1.5 hours
• Up to 10 hours
5. COOLING: Fill the tank with water and press the “COOL” button. The
indicator light will turn on. To stop the unit from cooling, press the
button again.
6. ADDING WATER TO THE TANK: Follow these steps to add water to the
water tank:
• Pull off the water tank’s cover.
• Carefully pour water into the water tank.
• Do not exceed the “maximum” water line on the water level
indicator.
• For enhanced cooling, add ice to the tank.
INSTALLING FILTERS
1. Remove the two included filters from their packaging.
2. Unscrew the rear screen and install the two filters so that they are
nearest to the rear screen, not the front of the unit. The order the
filters are installed does not matter.
3. Close the rear screen and screw it back in.
4. Add water as mentioned in the previous section and your evaporative
cooler is now ready to use.
Loading ...
Loading ...
Loading ...