Loading ...
Loading ...
Loading ...
4
CONTROLS AND STARTING A WASH
To start a wash programme
1 Open the door to turn the dishwasher on.
z
The display will show the wash programme time.
2 Select desired wash programme on the dishwasher control panel.
z
The default cycle when you first turn the dishwasher on is Eco.
z
After the first wash the dishwasher will remember the last programme used.
3 Select a wash modifier (optional, DW60U6*, DW60UD6*, DW60UZ6* models)
z
The selected wash modifier indicator will be lit. (see ‘Selecting wash modifiers’).
4 Press
and close the door to start the wash programme
To pause and restart a wash programme
1 Open the door carefully to pause the programme. The time remaining will flash and the
pause beep will sound while the dishwasher is paused.
IMPORTANT!
There is a risk of being sprayed with hot water. Do not fully open the door until the
spray arms have stopped rotating.
2 Load, remove, or rearrange any dishes if needed.
3 Touch and close door in 4s to start the wash programme.
If the dishwasher is not restarted within 7 minutes, it will then beep until the cycle
is restarted.
To cancel or change a wash programme
1 Open the door carefully to pause the programme.
2 Touch and hold
to cancel the programme.
3 Touch any button to turn the dishwasher back on, and follow the steps
above “To start a wash programme”.
Loading ...
Loading ...
Loading ...