Southland SCV43 User Manual

Loading ...

ENG - 7

To Remove Tines:

1. Remove the pins from each end of the tine shaft. Refer

to Figure 3.

2. Slide the four tines off the tine shaft.

To Install Tines:

The 4 different tines are labeled “A”, “B”, “C”, and “D”. Refer

to Figure 4a for the location of the label.

For a 10” tilling width:

1. Assemble the tines as shown in Figure 4b. Make sure

the collars of the tines are facing each other.

2. Insert the pins into the holes at each end of the tine

shaft to lock the tines into place. See Figure 3.

For a 7” tilling width:

1. Only assemble tines B and C (the two inside tines). Do

not assemble tines A and D (the two outside tines).

Refer to figure 4b.

2. Insert the pins into the INSIDE holes of the tine shaft to

lock the tines into place. See Figure 5.

Fig. 3

D C B A

Fig. 4b

Fig. 4a

Fig. 5

Assembly (Continued)

• Save all instructions

How to Assemble the Tines

Loading ...

Southland SCV43 10" 43cc 2-Cycle Gas Cultivator