Loading ...
Loading ...
Loading ...
some models
To Jevel the cabinet using the front
rollers:
1
2
Remove the toe grille.
Use a fiat-blade screwdriver or % inch
socket wrench to raise or lower the front
rollers (Figure 2). Do not raise the cabinet
more than 9/16inch.
Raise
Raise the front of the refrigerator enough so
the doors close freely when opened halfway.
The refrigerator should slope 1/4inch to
1/2inch from front-to-back. Then level the
refrigerator from side-to-side.
4 Some models are equipped with an anti-
tip bracket (Figure 4). Lower it clockwise
until it contacts the floor.
Figure 2
OF
Use adjustable wrench to adjust leveling
screws. Lower the leveling screws on each
side clockwise until they contact the floor
(Figure 3). Do not raise the cabinet more
than 9/16 inch.
9/16,
Raise
Bracket
Figure 4 (some models)
The antFtip device must be
/_. installed according to the
//'_],r_, instructions in your Use &
CareManual.Failuretodo
SOw! resut !ninjury....
When reversing the door swing:
You MUST move the anti-tip bracket to align
with the hinges of the door. Failure to do so
will result in injury.
Figure 3
Loading ...
Loading ...
Loading ...