Loading ...
Loading ...
Loading ...
ADDiTiONAL THINGS YOU SHOULD KNOW
Now that you understand the basic operation functions, here are mare control features with which you should became
familiar.
The "coot circuit has an automatic 3 minute time delayed start if the unit is turned off and on quicHy. This prevents
overheating of the compressor and passible circuit breaker tripping. The fan will continue to run during this time.
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility
of having to roll through to select another mode.
The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.
The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the
other and back, press and hold bath the "TEMP/TIMER" Up(A) and Dawn (v) buttons for 3 seconds.
FAULTCODES -
If the display reads "ES" or "AS", a sensor has failed. Contact 1-800-4-MY-HOME® for repair.
Evaporator coil sensor Air temperature sensor
AUTO RE-START :
After a power outage, the unit will remember the last setting and return the unit to the same setting once power is restored.
FRESHAIR VENT CONTROL
1. Pushed In (Fig. 1) - Recirculates inside air
2. Partially Pulled Out (Fig. 2) - Draws fresh air into room
3. Fully Pulled Out (Fig. 3) - Exhausts air from room and draws fresh
air into room
Figure 1 ( VENT CLOSED )
Figure 2 ( VENT OPEN ) Figure 3 ( VENT & EXHAUST OPEN )
Loading ...
Loading ...
Loading ...