Loading ...
Loading ...
Loading ...
15
Product Care
Cleaning Your Grill Burners
Before removing the grates and burners, make sure the gas supply is off and the knobs are in the “OFF” position. To
disassemble the grill for thorough cleaning, remove parts after they have cooled in the following order.
Remove grill grates.
Remove ceramic briquette trays
1
2
1
3
4
Unclip holding tab at
the rear of each burner.
Note: Tabs may be sharp, wear gloves and use
care when removing and reinstalling burner.
Remove burner from holding
tab at rear of burner.
Cleaning and Maintenance
5
Remove burner from slots located in front mounting
bracket.
Note: When reinstalling burner, verify that gas inlet
opening of burner is over the gas orifice or injector
.
Once the burners are removed, clean the exterior with a wire brush. Clear out any clogged ports with a straightened paper
clip. NEVER use a toothpick or similar items as they may break off and clog the port. Shake out any debris through the air
shutter. Use a flashlight to inspect the burner inlet to en-sure it is not blocked. If obstructions can be seen, use a metal wire
coat hanger that has been straightened out to clean. You also may use an air hose to blow out any debris that may remain.
WARNING
Do not use flammable cleaning materials. Use a flashlight to
inspect the burner inlet to ensure it is not blocked. If obstructions
can be seen, use a metal wire coat hanger that has been
straightened out. Shake out any debris through the air shutter.
Burner
outlet
Loading ...
Loading ...
Loading ...