Loading ...
Loading ...
Loading ...
Oven Door
Leveling Legs
Do not place excessive weight on or stand on an open
oven door, This Could cause the range to tip over, break
the d00rl or !njure the user,
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and wiii decrease with use.
Oven Window
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
Storage Drawer
Do not store plastic, paper products, food or f!ammable
for these items when the oven is in use.
The storage drawer can be removed to allow you to clean
under the range.
To remove:
1. Empty'drawer and pull out to the first stop position.
2= Lift up the front of the drawer.
3. Pull out to the second stop position.
a=Grasp sides and lift drawer up and out=
To replace:
1. Fit the ends of the drawer glides into the rails in the range.
2. Lift up the front of the drawer and gently push in to the
first stop position.
3. Lift drawer up again and push until drawer is closed.
Be sure the anti4ip bracket secures one o1:the
rear [eveiing legs to the floor, This bracket pEe7
vents the range from accidentally tipping. J 1
The range should be leveled when installed. If _ _,,)/
the range is not level, turn the leveling _ _:-"J
legs, located at each corner of the _K_--Z-
" " _ "_"_ _ ANTI-TIP
range, untul range uslevel. £_ BRACKET
\ LEVELING LEG
Oven Light
o Make sure bulb Cover and bu!b are cool before touching,
To replace oven light bulb:
1. When oven is cool, hold bulb cover BULSOOVER
in place, the[) slide wire retainer
off cover. Note: Bulb cover
wiii fall if not held in place
while removing wire retainer.
2. Remove bulb cover and light
RETAINER
bulb.
3. Replace with a 40-watt appliance bulb.
4. Replace bulb cover and secure with wire retainer.
5. Reconnect power to range. Reset clock.
Convenience Outlet
(Canadian models only}
The convenience outlet is located on the
lower left side of the backguard. Be sure
appliance cords do not rest on or near
the surface element. If the surface
dement is turned on, the cord and
outlet will be damaged.
The convenience outlet circuit breaker
may trip if the small appliance plugged
'F-"
@ S
/........................................../0 .................
CIRCUIT BREAKER
into it exceeds 10 amps. To reset the circuit breaker, press the
switch located on the lower edge of the backguard.
20
Loading ...
Loading ...
Loading ...