Loading ...
Loading ...
Loading ...
35
1�Press and hold buttons 2 and 4 for 1 second to enter the menu�
2�Press button 1 to scroll to the Blend Cycles menu and press button 5 to select�
3�Press button 5 to select the Standard Blend Cycles�
4� Use button 1 to scroll and find Disable Button, then press button 5 to select�
5�Press the button you want to disable, then press button 5 to select or pulse
button to cancel and return to the previous menu�
Note: After you have disabled a button, you will notice that an
asterisk appears after the profile name when you return to operation mode.
The disabled button will also not appear on control panel.
Loading a new profile on your blender will reset the profiles and enable all
the cycle buttons again.
Permanently Disable Cycle Buttons
To permanently change the cycle buttons in a profile you can export the revised
profile to a USB drive, and then import the profile on the blender� Or you can
disable any number using the Blend Wizard (my�blendtec�com), and then export
the revised profile to the blender�
4.3.3 The Blend Wizard
In addition to using the profiles and cycles preprogrammed on your blender, you
can use the Blend Wizard to create custom profiles and cycles� For instructions
on using the Blend Wizard to easily develop custom profiles and cycles, visit
my�blendtec�com�
Importing Custom Profiles and Cycles
After you’ve created your custom profiles and cycles using Blend Wizard and
downloaded them to a USB flash drive, use the follow steps to import the file to
your blender�
1�Locate the USB port on the bottom of the blender�
2�Plug the USB flash drive into the blender’s USB port�
Note: If the blender is in manual or automatic operation mode, the USB
flash drive menu will automatically load on the screen. If the blender is in
programming mode, go to the main menu and select USB Flash Drive.
3�Use button 1 to scroll through the menu and button 5 to select Import Profile�
4�Use button 1 to scroll through the items on the flash drive and locate the
desired custom profile file (by default named ICBU�BPF)�
ENGLISH
Loading ...
Loading ...
Loading ...