Loading ...
Loading ...
Loading ...
5
1886
1886
We know wiring is hard. Let’s make it easier.
You are going to need these:
4 Wire Nuts (these are in the bag)
Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch
setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualied electrician.
Wiring the Fan
Connect the 2 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling and ceiling plate.
Connect the black wire
(ungrounded) from the
ceiling to the black
wire from the receiver.
Connect the white wire
(grounded) from the ceiling
to both the white wire from
the receiver and the white
wire from the fan.
White
White
Black
Ungrounded
Grounded
Connect the blue wire
from the receiver to the
blue wire (or possibly
black with white stripe
wire) from the fan.
Connect the yellow wire
from the receiver to the
black wire from the fan.
Black
Yellow
Blue
Blue
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualied electrician.
1
STEP
2
STEP
Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Bulbs Remote
WARNING
The ceiling fan must be grounded. If the
ground wire for the installation site is not
present, immediately STOP installation and
consult a qualied electrician.
Have extra wiring?
Turn the wires upward and push them carefully back through
the hanger bracket into the outlet box. Spread the wires apart,
with the grounded wires on one side of the outlet box and the
ungrounded wires on the other side of the outlet box. Make
sure that the wires are still attached to the wire nuts.
Hunter Pro Tip:
Loading ...
Loading ...
Loading ...