Loading ...
Loading ...
Loading ...
Use
18
3.4 Using the hob
All the appliance’s control and monitoring
devices are located together on the front
panel. The burner controlled by each knob
is shown next to the knob. The appliance is
equipped with an electronic ignition
device. Simply press the knob and turn it
anti-clockwise to the maximum flame
symbol, until the burner ignites. If the
burner does not light in the first 15
seconds, turn the knob to and wait 60
seconds before trying again. After lighting,
keep the knob pressed in for a few
seconds to allow the thermocouple to heat
up. The burner may go out when the knob
is released: In this case, the thermocouple
has not heated up sufficiently.
Wait a few moments and repeat the
operation. Keep the knob pressed in longer.
Correct positioning of the flame-spreader
crowns and burner caps
Before lighting the hob burners, make sure
that the flame-spreader crowns are
correctly positioned in their housings with
their respective burner caps. Make sure that
the holes 1 in the flame-spreader crowns
are aligned with the igniters 3 and
thermocouples 2.
Practical tips for using the hob
For better burner efficiency and to minimise
gas consumption, use pans with lids and of
suitable size for the burner, so that the
flames do not reach up the sides of the pan.
Once the contents come to the boil, turn
down the flame far enough to ensure that
the liquid does not boil over.
In case of an accidental switching
off, a safety device will be tripped,
cutting off the gas supply, even if
the gas cock is open. Return the
knob to and wait at least 60
seconds before lighting it again.
Pan diameters:
• AUX: 12 - 14 cm.
• SR: 16 - 24 cm.
• UR-3c: 18 - 28 cm.
Loading ...
Loading ...
Loading ...