Loading ...
Loading ...
Loading ...
Installation requirements
English28
Installation requirements
Gas supply requirements
Provide adequate gas supply
This appliance is designed to operate at a manifold pressure of 5 in (13 cm) of water
column on natural gas or 10 in (25 cm) of water column on LP gas (propane or butane).
Make sure you are supplying your appliance with the type of gas for which it is designed.
When checking for proper operation of the regulator, the inlet pressure must be at least 1
in (2.5 cm) greater than the operating (manifold) pressure as given.
The pressure regulator located at the inlet of the appliance manifold must remain in the
supply line regardless of whether natural or LP gas is being used.
NOTE
• The appliance with its own regulator. Use only the provided regulator, which must be
installed in the gas line that runs from the gas inlet to the gas shut-off valve.
• An external manual shut-off valve must be installed between the gas inlet and the
appliance for turning on/off gas to the appliance.
• Be sure the connectors are installed by a qualified installer.
• For a new appliance, never install used connectors, which can leak gas and cause
personal injury. Use only new, flexible connectors.
Loading ...
Loading ...
Loading ...