Loading ...
Loading ...
Loading ...
9
Cycle and Option Descriptions
CYCLE SELECTIONS
CYCLES SOIL LEVEL
The most advanced and versatile cycle. This cycle senses load size, soil amount, and toughness of soil, to
adjust the cycle for optimal cleaning using only the amount of water and energy needed.
All soil levels
Use for hard-to-clean, heavily soiled pots, pans, casseroles, and tableware. All soil levels
This cycle with only the Heat Dry option selected is recommended to completely wash and dry a full load of
normally soiled dishes. The energy label is based on this cycle.
All soil levels
Our most efficient dishwasher cycle helps minimize energy and water usage while cleaning dishes. Light soil
For fast results, 1 Hour Wash will clean dishes using slightly more water and energy. Select the Heat Dry
option to provide best drying performance.
Light to medium
soil
OPTION SELECTIONS
OPTIONS CAN BE
SELECTED
WITH WHAT IT DOES
Select this option to raise the water temperature in the final rinse to
approximately 156°F (69°C). The Sani Rinse option adds heat and time to the
cycle. This high temperature rinse sanitizes your dishes and glassware in
accordance with NSF International NSF/ANSI Standard 184 for Residential
Dishwashers.
Certified residential dishwashers are not intended for licensed food
establishments.
Sensor
Heavy
Normal
Raises the main wash
temperature to 135°F
(57°C) and the final
rinse temperature to
156°F (69°C)
Raises the main wash temperature to improve cleaning for loads containing
tough, baked-on food.
Sensor
Heavy
Normal
Raises the main wash
temperature to 135°F
(57°C)
Can be selected with any wash cycles for shorter heated dry times and to use
less energy.
Available with
any cycle
Uses a heating
element to speed
drying times.
Can be selected with any wash cycles. When selected with the 1 Hour Wash
cycle, the time is increased by approximately 30 minutes.
Available with
any cycle
Uses a heating
element to speed
drying times.
Operates dishwasher up to 24 hours later. Select a cycle and wash options.
Press DELAY. Each time you press Delay, the display will show the next
available hour up to 24 hours. It will show 1 more hour up to 8 (1,2,3...) and
then, after 8 hours it will increase by 4 hours each time you press Delay. It will
show 12,16, 20 and 24. Press START/RESUME. Close the door firmly.
NOTE: The dishwasher remembers the last selected delay. To reset the delay
time to one other than the one displayed, keep pressing the Delay button until
you reach the desired time delay.
NOTE: Any time the door is opened (such as adding a dish), START/RESUME
must be pressed again to resume the countdown of the delay.
Available with
any cycle
Delays the start of a
cycle for a maximum of
24 hours.
Loading ...
Loading ...
Loading ...