Loading ...
2
STEP 2 REMOVE DOOR PANEL
Open dishwasher door.
Remove the 6 Phillips head screws along the
side of the door (Figure 2) holding the inner door to
the outer panel. Retain screws.
Remove door panel.
Figure 2
NOTE: To prevent any damage, support the outer door
panel while removing the screws.
STEP 4 INSTALL THE ASSEMBLED PANEL
Figure 5
Figure 4
Close the dishwasher door.
Slide the panel assembly into the escutcheon tab
(Figure 4).
Escutcheon
Open the dishwasher door and reinstall the original
6 Phillips head screws to attach the inner door to the
trim kit assembly (Figure 5).
Close the door.
Escutcheon Tab
While supporting the door kit asm.
STEP 3 ASSEMBLE PANEL AND TRIM FRAME
Slide the 1/4" custom panel into the channel
between the trim and the steel panel (figure 3).
Place the assembled panel, appearance side
down on a flat protected surface. Be careful not to
scratch the custom panel or the trim.
Figure 3
Top View
Slide
Panel
Into
Frame
Custom Panel
Loading ...