Loading ...
Loading ...
Loading ...
,LL,.
DATES
BB _ lib
Check Brake Operation _
Check Tire Pressure
Check Operator Presence and
T Intedoc_ Systems
R Check for Loose Fasteners V' 1#17 I_
A Sharpen/Replace Mower Blades _l 4
T Lubrication Chart Of
0 Check Battery Level
R clean Battery and Terminsts I1_
Check Transaxle Cooling
Adjust Blade Belt(s) Tension ll_s
Adjust Motion Drive Belt(s) Tension V's
Check Engine Oil Level _
' Change Engine Oil _!3 '11#
E : clean Air Filter
N Clean Air Screen
Inspect Muffler;Spark Arrester I_
Replace Oil Filter (If equipped) I_1,=
Clean Engine Co_ing Fins Ik##2
Replace Spark P_ug _= ll_
Replace Air Filter Paper Cartridge
Replace Fuel Filter I II_
1 - Chenge mo_ often when operating undm a heavy load or in high ambient laraperatures. 5 - If 0quipbad with ad_Jstable system.
2 • Servic,e _ often when operating in dirty or dusty condifio_s, 6 - Not requited if equipped with rnalnler_nce-ftee battery¸
3 - if equipped with oil f_ter, change oil every 50 hours, 7 - Tighten front axle pivot bolt to 35 ft,*l_, maximum,
4 - P_pLe,ce tdsdes more oban when [t,owth.g in _ _, Do not overr_,
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To
receive full value from the warranty,
operator must maintain tractor as
instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and
help your engine run better and last
longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and
interlock systems for proper operation.
• Check for loose fasteners.
LUBRICATION CHART
Zerk Zerk
(_Front Wheel
Bearing
Zerk
Bearing Zerk
-... -~.
(DGeneral Purpose Grease
_)Refer to Maintenance "Engine" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubncated, use only a dry,
powdered graphite type lubricant
sparingly.
18
Loading ...
Loading ...
Loading ...