Loading ...
Loading ...
Loading ...
5
1886
Ceiling Bracket Hanging Fan Wiring Motor Housing Blades Light
Installing the Blades:
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Repeat x5
Repeat x5
Blade Arm Screw
Fan style may vary.
Note:
Installing the Motor Housing
1
STEP
2
STEP
Raise the motor housing up over the motor and ceiling
bracket. Turn the motor housing so the screw holes align
and the indentation in the housing locks into place with
the notch in the ceiling bracket. The motor housing is
not secured until the next step is complete. Do not
leave unattended.
With a Phillips head screwdriver, install
the four motor housing screws found in
the hardware bag. Tighten all four
screws securely.
x4
BAG
Notch
Indentation
Motor Housing
Screw
x10
BAG
Blade Arm Screw
The ared tops of the blade iron posts will be fully
visible above the blade when properly assembled.
Align the three blade holes with the three
blade iron posts. Squeeze the blade and
the blade iron post together.
Fan style may vary.
Note:
Fan style may vary.
Note:
Loading ...
Loading ...
Loading ...