Loading ...
Loading ...
Loading ...
8) Similarly, when use in NG status, turn the marked NG arrow upwards and tighten it to the screw cap
(see Figure 18). Repeat the above operation. The outlet pressure requires to be 4 ± 1in wc.
9) After the conversion is completed, the conversion label in the accessory bag needs to be attached
next to the original label.
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the
manufacturer’s instructions and all applicable codes and requirements of the authority having
jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion or
production of carbon monoxide may result causing property damage, personal injury or loss of
life. The qualified service agency is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation of the converted appliance is checked
as specified in the manufacturer’s instructions supplied with the kit.Complete parts list
identifying all components provided in the kit.
Installation
IMPORTANT: The gas cooktop must be installed by a competent person to the relevant Gas Standards.
Please, ensure that, once the gas cooktop is installed, it is easily accessible for the engineer in the
event of a breakdown.
WHEN THE GAS COOKTOP IS FIRST INSTALLED
Once the gas cooktop has been installed, it is important to remove any protective materials, which were
put on in the factory.
Any gas installation must be carried out by a competent person.
Important: When installing the gas cooktop above a built-in oven, the oven should be placed on two
12
Loading ...
Loading ...
Loading ...