Loading ...
Loading ...
Loading ...
Avoid Service
Checklist
Before calling for service, review this list. It may save both time and expense. The list includes
common concerns that are not the result of defective workmanship or materials in this washer.
OCCURRENCE POSSIBLE CAUSE SOLUTION
NOISE
"Clunking" or gearsounds. A certain amount of "clunking" or gear
soundsare normal in aheavy-dutywasher.
This is normal.
Rattling and clanking noise. Foreign objects such as coins or safety pins
may be in tub or pump.
Stop washer and check tub. If noise continues after
washer is restarted, objects may be in pump. Call your
authorized servicer.
Beltbucklesandmetalfastenersarehitting To prevent unnecessary noise and damage to tub,
wash tub. fasten fasteners and turn items inside out.
Squealing sound or hot Washer is overloaded. Do not overload washer. Stop washerand reduce load.
rubber odor.
Thumping sound. Heavywashloadsmayproduceathumping This is usually normal. If sound continues, washer is
sound, probably out of balance. Stop washer and redistribute
wash load.
Vibrating noise. Washer is not resting firmly on floor. Move washer so it rests firmly on floor. Adjust leveling
legs. See INSTALLATION INSTRUCTIONS for details.
Shipping bolt and block have not been See INSTALLATION INSTRUCTIONS for removing
removed during installation, shipping bolt and block.
Wash load unevenly distributed in tub. Stop washer and rearrange wash load.
OPERATING
Washer does not start. Electrical power cord may not be plugged Make sure plug fits tightly in wall outlet.
in or connection may be loose.
House fuse blown, circuit breaker tripped,
or a power outage has occurred.
Reset circuit breaker or replace fuse. Do not increase
fuse capacity. If problem is a circuit overload, have it
corrected by a qualified electrician. If problem is a
power outage, call local electric company.
Water supply faucets are not turned on. Turn on water supply faucets.
Cycle selector is not in correct position. Move indicator clockwise slightly. Pull out knob.
Motor isoverheated. Washer motor will stop if it becomes overheated. It will
automatically restart after a cool down period of up to
30 minutes (if washer has not been manually turned
off).
Washer won't spin. Lid is not completely closed.
Residue left in tub. Heavily soiled items.
Close lid completely.
Wipe tub with a nonabrasive household cleanser, then
rinse. Shake or brush excess dirt and sand from items
before washing.
10
Loading ...
Loading ...
Loading ...