Loading ...
Loading ...
Loading ...
Keepyourrefrigeratorandfreezercleantopreventodorbuild-up.Wipeupanyspillsimmediatelyandcleanbothsectionsat
leasttwiceayear.Neverusemetallicscouringpads,brushes,abrasivecleanersorstrongalkalinesoiutionsonanysurface.Do
notwashanyremovablepartsinadishwasher.Always unplug the electricM power cord from the wall outlet before cleaning.
Care & Cleaning Chart
Part Cleaning Agents Tips and Precautions
Interior/Door Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to
Liner • Soap and water
wring excess water out of sponge or cloth before cleaning around
• Baking soda and water
controls, light bulb or any electrical part.
Door Gaskets • Soap and water Wipe gaskets with a clean soft cloth.
Drawers/Bins • Soap and water
Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Glass Shelves • Soap and water Allow glass to warm to room temperature before immersing in warm
water.
• Glass cleaner
• Mild liquid sprays
Toe Grille • Soap and water Vacuum dust from front of toe grille. Remove toe grille (See illustration on
• Mild liquid sprays page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse
• Vacuum attachment and dry.
Exterior and • Soap and water
Handles
Exterior and
Handles
(Stainless
Steel Models
Only)
• Soap and water
• Ammonia
• Stainless Steel
Cleaners
Condenser • Vacuum attachment
Coils
Do not use commercial household cleaners, ammonia, or alcohol to clean
handles.
Clean stainless steel front and handles with non-abrasive soapy water
and a dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn
spots with an ammonia-soaked paper towel, and rinse. Use a non-
abrasive stainless steel cleaner. These cleaners can be purchased at
most home improvement or major department stores. Always follow
manufacturer's instruction. NOTE: Always, clean, wipe and dry with the
grain to prevent cross-grain scratching. Wash the rest of the cabinet
with warm water and mild liquid detergent. Rinse well, and wipe dry with a
clean soft cloth.
Use the dusting tool attachment on your vacuum to remove dust build-up
on the condenser coils (see item "J" in illustration on page 15 for location).
16
Loading ...
Loading ...
Loading ...