Frigidaire LFFH20F3QWG freezer

User Manual - Page 12

For LFFH20F3QWG.

PDF File Manual, 15 pages, Download pdf file

Loading ...
Loading ...
Loading ...
12
BEFORE YOU CALL
PROBLEM CAUSE CORRECTION
APPLIANCE OPERATION
Appliance
does not run.
Appliance is plugged into a
circuit that has a ground
fault interrupt.
Temperature Control is in
the OFF position or POWER
OFF position.
Appliance may not be
plugged in or plug is loose.
Hose fuse blown or tripped
circuit breaker.
Power outage
Use another circuit. If you are unsure
about the outlet, have it checked by a
certied technician.
See Setting the Temperature
Control section.
Ensure plug is tightly pushed into outlet.
Check/replace fuse with a 15-amp time-
delay fuse. Reset circuit breaker.
Check house lights. Call local electric company.
Appliance
runs too much
or too long.
Room or outside weather
is hot.
Appliance has recently
been disconnected for a
period of time.
Large amounts of warm
or hot food have been
stored recently.
Door is opened too fre-
quently or too long.
Door may be slightly open.
Temperature control is set
too low.
Gasket is dirty, worn,
cracked, or poorly tted.
It’s normal for the appliance to work lon-
ger under these conditions.
It takes 4 hours for the appliance to cool
down completely.
Warm food will cause appliance to run
more until the desired temperature is
reached.
Warm air entering the appliance causes it
to run more. Open door less often.
Ensure door is tightly closed.
Turn control knob to a warmer setting. Allow
several hours for the temperature to stabilize.
Clean or change gasket. Leaks in door seal
will cause appliance to run longer in order
to maintain desired temperatures.
Pressing the “-”
or “+” buttons
on the control
panel does
not change the
set points.
Verify the control panel
is not locked or in
Sabbath Mode.
To unlock, press and hold “Set” button for
3 seconds; to exit Sabbath Mode press and
hold “Set” and “Options” for 5 seconds.
APPLIANCE TEMPERATURES
Interior tem-
perature is
too cold.
Control is set too low.
The appliance is in Quick
Freeze mode.
Set control to a warmer setting. Allow sev-
eral hours for temperature to stabilize.
Exit Quick Freeze mode by entering into
the options menu on the control panel and
pressing the “set” button once the indicator is
highlighted next to “Quick Freeze”.
Visit our web site at
www.frigidaire.com.
1-800-944-9044 (United States)
1-800-265-8352 (Canada)
Before calling for service, review this list. It may save you time and expense. This list includes com-
mon occurrences that are not the result of defective workmanship or materials in this appliance.
Loading ...
Loading ...
Loading ...