Loading ...
Loading ...
Loading ...
9
5. To set the clock, touch any key to enter standby mode.
① Touch and hold timer key for 2-3 seconds, the first
two segments of the LCD screen will flash.
Touch key to increase the hour setting and touch
key to decrease. Note: hour can be set from 00 to 23.
② When the correct hour is set, touch the timer key , the
second two segments of the LCD screen will
flash. Touch key to increase the minute setting and
touch key to decrease. Note: minutes can be set
from 00 to 59.
③ When the correct time is displayed, touch the timer key
, the time is now set and the Rangehood is in standby
mode.
④ Once in time set mode after touching & holding key
for 2-3 seconds, you must touch key two more times
to exit time set mode. While in time set mode, you
cannot hold key for 2-3 seconds to re-enter time set
mode, you must exit first.
6. To set the timer for the Rangehood to switch off
automatically, touch or key to set the motor speed.
The Rangehood can be set to switch off automatically after
5/15/30 minutes.
① Touch the timer key , the LCD screen will display 5,
touch again and it will display 15, touch again and it
will display 30. If you touch again, the LCD screen will
display the time of day and the timer will be cancelled.
② When the desired timer setting is displayed, the
Rangehood will continue to operate, the display will
count down the minutes and when the LCD screen
counts down to 0:00 the Rangehood motor switches off
and the Rangehood is in standby mode. Rangehood will
go into off mode after 30 seconds.
③ While in timer mode, you can adjust the motor speed,
however if you switch the motor off, the timer will be
cancelled.
Loading ...
Loading ...
Loading ...