KitchenAid KEWD175HBT06 warming drawer

User Manual - Page 8

For KEWD175HBT06.

PDF File Manual, 20 pages, Download pdf file

Loading ...
Loading ...
Loading ...
IMPORTANT:Beforecleaning,makesureallcontrolsareoffand
thewarmingdrawerandthedraweraccessoriesarecool.Always
followlabelinstructionsoncleaningproducts.
Soap,waterandasoftclothorspongearesuggestedfirstunless
otherwisenoted.
STAINLESSSTEELSURFACES
Donotusesoap-filledscouringpads,abrasivecleaners,Cooktop
PolishingCreme,steel-woolpads,grittywashclothsorsome
papertowels.Damagemayoccur.
Rubindirectionofgraintoavoiddamaging.
StainlessSteelCleaner&Polish(notincluded):
See"AssistanceorService"sectiontoorder.
Liquiddetergentorall-purposecleaner:
Rinsewithcleanwateranddrywithsoft,lint-freecloth.
Vinegarforhardwaterspots
CONTROLKNOB
Donotusesteelwool,abrasivecleansersorovencleaner.
Donotsoakknob.
Whenreplacingknobs,makesureknobsareintheOFFposition.
Soapandwater:
Pullknobsstraightawayfromcontrolpaneltoremove.Wash,
rinseanddrywithasoftcloth.
WARMING DRAWER
Paper towel and spray glass cleaner:
Make sure drawer is cool. Follow manufacturer's instructions.
Warm, soapy water and a nonabrasive, plastic scrubbing
pad:
Wash, wipe with clean water and dry thoroughly.
POSITIONING RACK
Steel-wool pad and warm, soapy water:
Wash, rinse and dry thoroughly.
PANS
Mild soap and water:
Wash, rinse and dry with soft cloth. Do not clean in
dishwasher. Discoloration will occur.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Warming drawer will not operate
Is the power supply cord unplugged?
Plug into a grounded 3 prong outlet.
Has a household fuse blown, or has a circuit breaker
tripped?
Replace the fuse or reset the circuit.
Is the power switch in the "ON" position, but the indicator
light not illuminated?
Reset unit by turning the power switch to "OFF" and then
"ON." The unit may have been in the timer mode, and the
timer may have ended its cycle.
Drawer does not slide properly
Has the drawer been mounted properly on the slides?
See "Warming Drawer Care" section.
Has the drawer been overloaded?
The weight inside the drawer should not exceed
100 Ibs (45 kg).
Is the drawer load uneven?
Redistribute the food to evenly balance the weight.
Excessive moisture on the drawer
Did you preheat the drawer?
Preheat the drawer before each use. See "Warming Drawer
Use" section.
Is the MOIST-DRY setting correct?
Set the MOIST-DRY slide to "DRY" to vent the moisture.
Was the food covered with aluminum foil?
See "Aluminum Foil" section.
Drawer does not shut off automatically
Have you bypassed the timer?
Check the Timer Override switch. The Timer Override switch
must be in the "OFF" position for the timer to function
properly.
Loading ...
Loading ...
Loading ...