Loading ...
Loading ...
Loading ...
9
Adjusting End Tone On or Off
The end tone is factory set for On but can be changed to Off.
1. Press SETTINGS four times until “END TONE” scrolls from
top to bottom in the upper text area and “ON. Press (^) for
OFF” scrolls twice from right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to turn the end tone off.
“OFF. Press (^) for ON” will scroll twice from right to left in the
lower text area. The end tone has now been turned off.
Adjusting Keypress Tone On or Off
The keypress tone is factory set for On but can be changed to
Off.
1. Press SETTINGS five times until “KEYPRESS TONE” scrolls
from top to bottom in the upper text area and “ON. Press (^)
for OFF” scrolls twice from right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to turn the keypress
tone Off.
“OFF Selected” will scroll twice from right to left in the lower
text area. The keypress tone has now been turned off.
Adjusting Reminder Tone On or Off
The reminder tone is factory set for On but can be changed to
Off.
1. Press SETTINGS six times until “REMINDER TONE” scrolls
from top to bottom in the upper text area and “ON. Press (^)
to OFF” scrolls twice from right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to turn the reminder
tone Off.
“OFF Selected” will scroll twice from right to left in the lower
text area. The reminder tone has now been turned off.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To Change the Clock to 24-Hour Format:
1. Press SETTINGS seven times until “12/24 HOUR” appears in
the upper text area and “12HR Press (^) for 24Hr” scrolls
twice from right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad once to select 24 hour
and again to select 12 hour.
3. Wait 30 seconds or press CANCEL to accept the setting.
To Set the Clock:
Before setting, make sure the oven and Kitchen Timer are off.
1. Press CLOCK. “Set Time” appears in the upper text area.
2. Press the Temp/Time “up” or “down” arrow pads until the
desired time is displayed.
3. “Press CLOCK” appears in the upper text area and “PUSH
START” scrolls from bottom to top in the lower text area.
4. Press CLOCK or START. “Time Set” will scroll from top to
bottom in the upper text area for 5 seconds. Once it
disappears, the time is set.
Sabbath Mode
Sabbath Mode is used to configure the oven system so that
certain features and modes are disabled or defeatured. By
enabling Sabbath Mode, the oven will conform to Star-K Jewish
Sabbath requirements.
The oven is factory set with Sabbath Mode Off.
To Enable Sabbath mode (one time only):
1. Press SETTINGS eight times until “SABBATH” appears in the
upper text area.
2. Press the Temp/Time “up” arrow pad to enable Sabbath
Mode.
“ON Selected” scrolls twice in the upper text area. The oven
is now in Sabbath Mode.
12-Hour Auto Off
The oven control is set to automatically shut off the oven
12 hours after the oven turns on. This will not interfere with any
timed or delayed cook function.
To Cancel 12-Hour Auto Off:
1. Press SETTINGS nine times until “12 Hr AUTO_OFF” appears
in the upper text area and “ON. Press (^) to OFF” scrolls
twice from right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to turn off the 12-hour
Auto Off feature.
“OFF. Press (^) to ON” scrolls twice from right to left in the
lower text area.
3. “OFF selected” scrolls twice from right to left in the lower text
area. The feature has been turned off.
Language
The Language is factory preset to English but can be changed to
French or Spanish.
To Change the Language to French:
1. Press SETTINGS 10 times until “LANGUAGE” appears in the
upper text area, and “ENGLISH. Press (^) for French Press
( ) for Spanish” scrolls twice from right to left in the lower
text area.
2. Press the Temp/Time “up” arrow pad to select French.
If French is selected, “FRENCH. Press (^) for English Press
( ) for Spanish” scrolls twice from right to left in the lower
text area.
3. “FRENCH Selected” will scroll twice from right to left in the
lower text area. The language displayed will now be French.
To Change the Language to Spanish:
1. Press SETTINGS 10 times until “LANGUAGE” appears in the
upper text area, and “ENGLISH. Press (^) for French Press
( ) for Spanish” scrolls twice from right to left in the lower
text area.
2. Press the Temp/Time “down” arrow pad to select Spanish.
If Spanish is selected, “SPANISH. Press (^) for French Press
( ) for English” scrolls twice from right to left in the lower text
area.
3. “SPANISH Selected” will scroll twice from right to left in the
lower text area. The language displayed will now be Spanish.
^
^
^
^
Loading ...
Loading ...
Loading ...