Loading ...
Loading ...
Loading ...
12
CONTROLS AND SETTINGS
NOTE
When first turning appliance on, adjust
control to Recommended. After 24
hours, adjust the controls as needed.
IMPORTANT
Adjusting the appliance temperature
control to “o” turns o the compressor
and prevents the appliance from cool-
ing, but does not disconnect the power
to the light bulb and other electrical
components. To turn o power to your
appliance, you must unplug the power
cord from the wall outlet.
Cool Down Period
To ensure safe food storage, allow the
Appliance to operate with the door
closed for at least 8 hours before loading
it with food.
Appliance Control
Temperature Adjustment
Adjust temperature gradually: adjust the
knob in small increments, allowing the
temperature to stabilize.
• For colder temperatures, adjust the
knob towards Coldest.
• For warmer temperatures, adjust the
knob towards Cold.
Appliance Control
Alarms
High Temp Alert
If the temperature inside the cabinet
exceeds 23°F (-5°C), the LED light at
the bottom of the cabinet will flash and
the alarm will sound. The alarm can be
reset by opening the door. The LED
will continue to flash until the cabinet
temperature is below 23°F (-5°C).
Door Ajar Alert
This alert will sound to alert you that
the door has been open for 5 minutes or
more. The audible alert will sound until
the door is closed.
Power On Light
The green LED Power On light indicates
that the appliance is properly connected
to electrical power. The light glows even
when the temperature control is turned
to OFF. If the light goes out, refer to
“Appliance does not run” in the SELF
HELP section.
Loading ...
Loading ...
Loading ...