Loading ...
Loading ...
Loading ...
Reverse Osmosis Dimensions
T
15"
T
13"
Plan the Installation
Tools and Parts Needed
Assemble the required tools be*k_restarting installation. Read and follow the instructions providedwith
any tools listed here.
• Adjustable wrench
• Larger adjustable jaw pliers
• Screwdrivers
• Electric drill and drill bit
Location Requirements
• Pliers
• Pipe wrench
• Plumbers putty (for sink, if necessary)
Consider all of the following when selecting an installation location for the reverse osmosis.
• For optimum performance your reverse osmosis system should be installed on softened water.
• To provide supply water to the RO system inlet use the feed supply fitting (provided) or buy and
install pipe fittings for tubing connection. See "Install Cold Water Supply Fitting" section.
• A refrigerator ice maker may not operate properly when connected to a reverse osmosis system
that has been installed on a water system that operates outside of the specified pressures listed. See
"Product Specifications" section.
• Chlorine in the water can adversely effcct the RO membrane life. Most cities add chlorine to the
water supply to kill bacteria. The prefilter removes chlorine up to the limits shown in the specifica-
tions before it enters the RO membrane. It is important to replace the prefilter cartridge at least
every 6 months. See "Product Specifications" section.
• Check your water supply. The cold water supply to the RO system must be within certain quality
limits. See "Product Specifications" section. If supply water is not within limits, the RO system
can not make product water as it should and reduced RO membrane life will result.
Remote Locations
• A basement area underneath the sink
Parts needed for remote location:
• An adjacent room or closet
• Longer lengths of tubing, see "Repair Parts" section
• Telephone style wire extension (purchase separtately) may be needed
IMPORTANT: Telephone style wire extension must consist of a male connector on one end and
a female connector on the other to keep proper polarity. Polarity may be reversed
if a coupler is used and the monitor will not work.
Loading ...
Loading ...
Loading ...