Loading ...
Loading ...
Loading ...
Cleaning and care
101
Rinse the mesh under running luke-
warm water. Turn the mesh over un-
der the running water to clean it on all
sides.
4.
Reinsert the mesh into the back of
the filter cartridge 4.
Slide the filter cartridge as far as it
will go into the filter opening 5., mak-
ing sure the cap is horizontal.
Turn the cap of the filter cartridge
clockwise until it is in the vertical po-
sition 6.
Risk of damage caused by water
rushing out.
If the filter cartridge is not inserted
correctly, there is a risk of water
leaking out of the appliance.
When inserting the filter cartridge, be
sure to turn it as far as the marker.
Once the IntensiveClear 2.0 mesh filter
has been cleaned, the Water Filter Display
must be reset using Settings
mode on the display (see “Selecting
additional settings – Resetting the Water
Filter Display ”).
Loading ...
Loading ...
Loading ...