Loading ...
Loading ...
Loading ...
19
Fig.5.1
VITROCERAMIC SURFACE
Before cleaning the top, make sure that it is switched off.
Remove any encrustation using a special scraper which can be bought (fig. 5.1).
Remove dust using a damp cloth.
Detergents can be used as long as they are not abrasive or corrosive.
All residues of detergent must be eliminated with a damp cloth.
Keep all objects that could be melted by the heat away from the top: plastic objects,
aluminium foil, sugar or sugary products.
If an object melts on the top, remove immediately (while the top is still hot) using a
special scraper to avoid permanent damage to the pyroceram surface.
Avoidusingknives and pointedobjects as theycoulddamage thesurfaceof thetop.
Also avoid using abrasive sponges or wire wool which can permanently scratch the
pyroceram surface.
ATTENTION: MOST IMPORTANT!
Ifcleaningtheglassceramichobusingaspecialscrapertooltakeextracareto
avoiddamagingtothesealattheedgesoftheglassceramicsurface.
5
Loading ...
Loading ...
Loading ...