Loading ...
Loading ...
Loading ...
• Atthispoint,removetheDecorativeBoltonbottomon
refrigeratorhousingfromtheleftsideof refrigerator
(Fig.24).YouwillneedthisholefortheBottomHinge.
MovetheBottomHingetotheleftsideofhousingkeeping
thesameorientation,andreattachwith3bolts(Fig.25).
NowmoveDecorativeBolttoholeonlowerrightside
ofhousing.
Fig.25
Turnrefrigeratordoorupsidedownonanon-scratching
surface.
Withdoorupsidedown,loosenthe2 screwsandremovethe
DoorCloser/Stop(Fig.26),thenloosentheothertwoscrews
toremovethebottomHingePinInsertBracketwithHinge
PinInsert(seeFig.27).
NOTE:TheRefrigeratorDoorCloser/Stopisnotusedon
all models.Themodelyouhavemaynotincludethispart.
Hinge __![_j_ _ _)
Pin Bracket _
Hinge Pin _: :
Insert /_--'_t"i_
• Take out the Hinge Pin Insert and move
the Bracket to the other side of the door,
keeping the same orientation (Fig. 28).
• Place Hinge Pin Insert into the left side
of the bracket. Tighten Hinge Pin Bracket
to door (Fig. 28).
Fig.28
Hinge
Bracket
e Pin Insert
• Take Door Closer/stop and flip (see Fig. 29).
Line up screw holes and mount on left side
of door bottom with the two screws. Turn
door upright. It is now ready for re-attaching.
NOTE: The Refrigerator Door Closer/Stop is not
used on all models. The model you have may not
include this part.
Fig. 29
• With flat-head screwdriver, carefully pry
off and remove the cover over the screw
holes on the left side of refrigerator
housing (Fig. 30).
Fig. 30
]3
Loading ...
Loading ...
Loading ...