Loading ...
Loading ...
Loading ...
^
Please read the "Important Safety
Instructions" and Installation
instructions before installing this
hood.
Non-return flap
The hood comes equipped with a
non-return flap. This flap automatically
closes when the hood is turned off so
that no exchange of outside air and
room air can occur.
Uninstall the non-return flap when your
exhaust system is equipped with a
non-return flap or if the hood is used in
recirculation mode.
^
Holding the non-return flap at the
wire, pull it out of the bracket.
The DA 2280 is equipped with one, the
DA 2210 with two non-return flaps.
,
CAUTION
To avoid risk of hand or other injury,
avoid contact with sharp edges
during the assembly and installation
process.
Installation
The hood is designed to be installed
within cabinetry and kitchen islands.
The top half (motor and fan assembly)
should be accessible after installation.
If the motor and fan assembly are not
accessible, assemble the ductwork and
the electrical connection before the
installation.
^ Insert and align the hood from the
bottom up in the cut out.
^
Secure the hood through the frame
with the screws (3.5 x 16 mm).
Installation
28
Loading ...
Loading ...
Loading ...